All our products meet international quality standards
It is well received in different markets all over the world
Product Description
Our JC-15-50 15m bus spray booth is applicable for the repair and fabrication of various transportation tools, such as the vans, as well as the bus of 12m long.
With solid strength, we can well guarantee the design and manufacturing of this series product. We give a technical design in accordance with the site conditions and environmental requirements for installation. Our 15m bus spray booth is fully guaranteed to be practical, economical, safe, and energy-efficient.
Features
1)For supplying air, two 7.5KW centrifugal fans are adopted. For exhausting air, one 15KW large-impeller fan is utilized, which is driven by the belt. In this way, the air change ratio inside the chamber can be guaranteed, and the paint mist can be well discharged.
2)Moreover, our 15m bus spray booth puts to use a set of RG5S burner which comes from Italy Riello brand.
3)All light tubes are equipped with the renowned-brand electronic ballast. In comparison with the former electronic lamps, they can give more stable performance.
Noble Refinish spray booth aims to promote the efficiency of the workshop and enlarge the profits for our customer. For this purpose, we must achieve the fastest drying time, the lowest operation costs and as little environment impact as possible.
Main Specification
| Model No. | JC-15-50 Bus Spray Booth |
| Room Size | |
| Inner Size | 15000×5000×5000 mm(L×W×H) |
| Outer Size | 15125×6900×5600 mm(L×W×H) |
| Channel（Pit） | |
| Channel | 2 rows of pits for exhaust air, single pit size: 12650×760×800 mm (L×W×H), glass fiber filter cotton and ground grille are laid on the pit |
| Grilles’ Loading capacity | 600 kg/single wheel |
| Grill | 748×1148×30mm(L×W×H), It is welded by 30×4mm flat steel + D8 twisted steel and galvanized. |
| Floor Filter | G2 Grade fiberglass filter |
| Cabin | |
| Cabin Structure | Flat Roof |
| Plenum height | 600mm |
| Wall Panel | Insulation mechanism rock wool foam board 75mm total thickness, substrate 0.5mm color steel plate, foam density: 100kg/m³ |
| Roof | The roof adopts European style convex top net with hinges, which is easy to install and beautiful. |
| Roof panel | 0.7mm Galvanized panel |
| Cover Material | 1.0mm Bending and forming of galvanized sheet, the surface is sprayed white. |
| Main Door | |
| Main Door | Four-leaf Main door |
| Size | 4000×4600 mm(W×H) |
| Arrangement | 1 set for car’s entrance and exit |
| Structure | Handmade sheet metal gate with glass observation window, 5mm tempered glass, aluminum alloy frame |
| Personnel Door | |
| Personnel Door | Aluminum frame personnel door |
| Size | 800×2000 mm (W×H) |
| Arrangement | 2 pcs |
| Structure | Aluminum frame door leaf , glass observation window, with pressure door lock |
| Top Lighting | |
| Qty and power | 18 sets of light boxes, each set of 4×20W,LED , 1440W |
| Arrangement | Two rows of ceiling lights are distributed on both sides of the top of the house. |
| Special | |
| Side Lighting | |
| Qty and power | 22 sets of light boxes, each set of 4×20W,LED , 1760W |
| Arrangement | Two rows of side lights are distributed on both sides of the wall panel of the house. |
| Special | Open light box inside design, integral glass cover |
| Description | LED tube |
| Total flux: | >1200Lux |
| Filter System | |
| Intake pre-filter | Bag filter G3 class. |
| Ceiling Filter | F5 grade filter , model 600G filter |
| Base paint filter | Bottom G2 Grade Fiberglass Paint Resistant |
| Exhaust filter | Flat type activated carbon filter G3 grade |
| Inlet System | |
| Qty | 2 sets |
| Fan Type | Double inlet centrifugal fan |
| Motor | 2x7.5KW,960 rpm, 380 V, 50 Hz |
| Fan info | Model:YDW-5.6M,air capacity:40000m³/h,pressure: 600pa |
| Diesel Heating system | |
| Qty | 2 sets |
| Heat exchanger material | stainless 1Gr18Ni9Ti（SUS304） |
| Heat exchanger | 232 KW |
| △T | 25°C(from 0°C to 25°C in painting status) |
| Max.working temperature | 80°C |
| Rising temperature time | 10-15mins (from 20° to 60°ºС) in baking status |
| Burner | Italy burner,Model:G20,capacity:200k Kcal/h |
| Outlet System | |
| Qty | 2 sets |
| Fan type | Belt-drive fan |
| Motor | 1x15KW,960 rpm, 380 V, 50 Hz |
| Fan info | Model:WDL-630,air capacity:30000m³/h,pressure: 600pa |
| Air speed | 0.29m/s |
| Noise | Less than 80db |
| Duct System | |
| Exhaust duct | 6pcs 1000×1000×1000mm straight duct,2pcs90°elbow,2pcs 45°elbow |
| Damper | 2 pcs manual damper |
| Control System | |
| Safety system | Over-temperature alarm shutdown function, room pressure protection, fault alarm, external indicator light, emergency stop |
| Control panel | Painting, raising temperature painting, baking , drying time setting, lighting switch, fault indicator, temperature controller, power switch, emergency stop switch, timer, pressure gauge |
| others | CE standard connecting cables, junction boxes, conduits and accessories |
| Voltage | 3×380V,50HZ |
Drawing
The Bodyshop will never be the same. Discover the customized high Design Technology for collision repair industry, the big range of solutions by Noble Refinish.
Automotive spray booth and large spray booth both can be Customized as you wish.
Try to contact Mr.Dennis if you have interests.
+86 18602063403
